The Leak Detection System (LDS) is designed to immediately detect leaks in your large liquid storage tank that incorporates a internal flexible membrane liner for the containment of that tank. By having automated leak detection, you save time. No more trips to the tank to check the leak port or forgetting to do regular checks. The system will sense the presence of any liquid and distinguish whether it is simply condensation or actual product. The system triggers an alert and sends out instant notifications to your team members as well as our staff, giving you peace of mind.
The Leak Sensor is installed directly on the 1” ball valve connected to the leak detection port on the exterior of the tank. It continually monitors activity in case of the presence of any liquid between the inner wall of the tank and the PVC liner.
Each LDS consists of a Main Controller and one Leak Sensor. However, extra Leak Sensors could be installed at the valve boxes, up to three. Depending on the design of the tank, the LDS could have as many as four Leak Sensors.
Additionally, the LDS has the ability to connect to a Top Mount High Level Detection system. A High Level Probe offering a single point switch for high level detection is installed. The probe is wired into the Main Controller and once activated it would trigger the control points for the pumps to prevent overfill of the tank.
Contact us to find out more about this service and how it is done properly.
